 | | Click image for closeup |
Goes With:
(Check a box to also add that item to cart)
| Power Conditioner. 11 lbs. Made by Furman. (EM.FUR-PL8P)
The most widely recognized and trusted name in AC power conditioning is proud to introduce the PL-Plus II Power conditioner, featuring Furman’s revolutionary SMP technology. Furman’s Series Mode Protection (SMP) circuit also features our exclusive Linear Filter Technology (LiFT). Together; these technologies comprise, what is without question, the worlds most advanced and comprehensive transient voltage surge suppressor. The PL-Plus II features LED rack lights which produce virtually no heat and provide an extremely long life span. A dimmer control for the rack lights allows the user to adjust the level of illumination or simply switch the lights off. Additionally, all units include a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the gooseneck’s operation. A front panel mounted master switch controls operation of the rear outlets, and glows red when the power is on. The front-panel circuit breaker can be quickly and easily reset should the unit be overloaded. The Series II also features a 10 foot, 14 gauge heavy-duty power cable. Features: - SMP with extreme voltage shutdown
- LiFT (Linear Filtering Technology) with zero groundcontamination
- Two retractable, long-life, low-heat LED lightfixtures with dimmer switch for rack illumination
- BNC connector on the rear panel allows you to attachany standard goose neck lamp to illuminate the rear of your rack
- Eight rear panel outlets and one front panel outlet
- 15 amp rating, with circuit breaker
- Three year limited warranty
- Front panel meter to display incoming line voltage ranging from 90 to 128volts
Specifications: - Current rating: 15 amps ("E" versions 10 amps)
- Operating Voltage: 90 to 140 VAC (“E” versions 180 to280 VAC)
- Over Voltage Shutdown: 140 VAC typically (“E” versions280 VAC typically)
- Voltmeter Accuracy: PL-PLUS II only: ±2 VAC,calibrated with internal trimpot adjustments
- Spike Protection Modes: Line to neutral, zero groundleakage
- Spike Clamping Voltage: 188 VAC peak @ 3,000 Amps, 133VAC RMS (tested to UL-1449 and USA / CIDA A-1-1, 6,000
- VAC @ 3,000 Amps)
- Response time: 1 nanosecond
- Maximum surge current: 6,500 amps
- Noise attenuation: 10 dB @ 10 kHz, 40 dB @ 100 kHz,100 dB @ 10 MHz. Linear attenuation curve from 0.05 - 100 Ohms line impedance
- Dimensions: 1.75” H x 19” W x 10.5” D.
- Weight: 11 lbs(5 kg).
- Construction: Steel chassis, .125” brushed and black anodized aluminum front panel; glass epoxy printed circuit boards
- Power consumption: 11 watts
- Safety Agency Listings: CE, NRTL-C
Browse Similar Items in:
Stage Power Conditioners
Recording Studio Power Conditioners
Theater Pin Spots
|
